+91-40-6723 7000     Contact Us

Vigilance Control Device (VCD) is a microcontroller based safety device which will automatically apply penalty brakes in case the driver is incapacitated. Similar operation is available in older locomotives in the form of Deadman’s Lever.

Operating Principle

Installed on locomotive, VCD gives cyclic warning to the driver. Based on drivers reaction to this warning (in terms of any of the pre-defined sets of actions to be done by the driver), the system automatically resets the alerting cycle. In case, the driver fails to acknowledge the initial alert signals, a set of additional alert indications are given. Even failing to respond to these additional alert signals also will result in automatic application of penalty brakes.

Some of the pre-defined set of actions to reset Alerter cycle can include:

  • Change of notch position/ Master Handle Reverser
  • Increase / decrease of level of dynamic braking
  • Normal application of formation brakes
  • Operation of locomotive horn
  • Operation of sanding valves
  • Pressing of VCD reset button
  • Other customized actions based upon locomotive type

These pre-defined set of actions are regularly monitored by VCD system and VCD cycle is reset whenever any of the above actions takes place.

In case the driver fails to acknowledge the Alerter warning signal during initial time period (say 60 sec), an additional indication in form of blinking LED will be given for a pre-defined time. After the predefined time if acknowledgement is not yet received, an additional audio alarm is given. If the driver further fails to acknowledge the alarm, automatic application of brakes will take place and Engine is brought to IDLE speed.

Used on Diesel Electric Locomotives

 

Used on Electric Locomotives

 

Vision & Mission

To be World Leader in Railway Products

Enjoying Innovation and Applying Technology for improving the lives of people.
Enhancing the image of India in the world, in high technology.


R & D Centre

MEDHA SERVO DRIVES PVT. LTD. 2-3-2/A,
Behind Mint Compound, Cherlapally, R.R.Dist,
Hyderabad - 500 051 Telangana, India.
Phone: +91-40-6723 7000; Fax: +91-40-2726 4144

Corporate Identity Number:  U31103TG1984PTC004436

REGISTERED OFFICE:
MEDHA SERVO DRIVES PVT. LTD. P-4/5B, IDA, Nacharam, Hyderabad - 500 076 Telangana, India
Phone: +91-40-2717 1101; Fax: +91-40-2715 4706